Bluetooth Setup - Ford Fiesta 2010 Owner's Manual

Bluetooth phone
After bonding a Bluetooth phone to the
system, this becomes the active phone.
For further information refer to the phone
menu.
Select the phone from the active phone
menu.
Turning the ignition and radio back on
again, the last active phone is picked up
by the system.
Note: In some cases the Bluetooth
connection must also be confirmed on
the phone.
Bond another Bluetooth phone
Bond a new Bluetooth phone as
described in the requirements for a
Bluetooth connection.
Phones stored in the system are
accessible by using the phone list on the
audio unit.
Note: A maximum of six devices may be
bonded. If six Bluetooth devices have
already been bonded, one of these has
to be debonded in order to bond a new
device.

BLUETOOTH SETUP

Before you can use your telephone with
your vehicle it must be bonded to the
vehicle telephone system.
Handling of phones
Up to six Bluetooth devices can be
bonded to the vehicle system.
Note: If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
Telephone
Note: Even if connected to the car
system, your phone can still be used in
the usual way.
Requirements for Bluetooth
connection
The following are required before a
Bluetooth phone connection can be
made.
1. The Bluetooth feature must be
activated on the phone and on the
audio unit. Make sure the Bluetooth
menu option in the audio unit is set to
ON. For information on phone
settings, refer to your phone user
guide.
2. In the Bluetooth menu on your phone,
search for Ford Audio and select it.
3. Enter the code number shown on the
vehicle display using the phone
keypad. If no code number is shown
on the display, enter the Bluetooth PIN
number 0000 using the phone
keypad. Now enter the Bluetooth PIN
number shown on the vehicle display.
4. If your mobile phone asks you to
authorize the automatic connection,
select YES.
(G1062198)
154
(G1062198)