Epson ET-4700 User Manual page 141

3. Select Fax Settings and press the OK button.
4. Select Fax Setting Wizard and press the OK button.
The Fax Setting Wizard screen appears.
5. Press the OK button to proceed.
6. On the Enter Fax Header screen, use the numeric keypad to enter the sender name for your fax
source, such as your name or a business name, then press the OK button. You can enter up to 40
characters.
7. On the Your Phone Number screen, use the numeric keypad to enter your fax number, up to 20
characters.
Note: The name and phone number in the fax header identifies the source of the faxes you send.
8. On the DRD Setting screen, do one of the following:
• If you have subscribed to a distinctive ring service from your telephone company, press the OK
button. Select the ring pattern to be used for incoming faxes, press the OK button, and skip to step
12.
• If you have subscribed to a distinctive ring service from your telephone company, press the OK
button. Select All and press the OK button.
141