Baratza Virtuoso+ Operation Manual page 8

Hide thumbs Also See for Virtuoso+:

REINSTALLING THE RING BURR & HOPPER

Grip the grind adjustment tabs to ensure that the grind adjustment ring is rotated fully counterclockwise.

Insert the ring burr with the red burr lifting tab aligned with the red indicator on the grind adjustment ring. These

red indicators should be close to grind setting 30.

Ensure that the ring burr is seated fully in place, and that the hopper gasket is installed on top with the thicker

side sitting within the plastic rim of the ring burr.

Align the grind setting indicator on the hopper with the triangle near grind setting 40. Push the hopper down and

rotate it clockwise until it starts to click.

CLEARING A CLOGGED GRINDER

If coffee is not falling into the grounds bin while grinding, and all parts are properly installed, a clog may be preventing the

coffee from moving through the grinder. This can happen if coffee is allowed to mound up past the maximum fill line, or if

dark, oily coffee or flavored coffee is used often without cleaning the grinder. Ground coffee can stick to built-up oils in the

grinder and cause a clog to form. Regular cleaning and proper use can prevent a clogged grinder.

If the grinder does become clogged, please visit

grinder.

December 2022 (v1.4)

VIRTUOSO+ OPERATIONS MANUAL

baratza.com/troubleshooting

to find detailed resources on unclogging the

Table of Contents

Show Quick Links