Usage Of Remote Control - Dimplex DCACP23 Instruction Manual

Usage of Remote Control

1. Unscrew the screw on the back of the remote.
2. To open the battery cover, press and hold in the direction of arrow 1 to release the upper
snap, and then pull it out in the direction of arrow 2 as per shown below.
3. Install 1x CR2032 3V battery in the slot. Close the cover, and place the screw back in the
hole.
4. When using the remote, please align to the position of the receiver.
5. When the power of the battery is depleted, open the battery cover as per the directions
above, and replace with a new CR2032 3V battery.
10
Child Lock