Stereo Recording And Playback/Second Audio Program (Sap) - Memorex MVDT2402 Owner's Manual

Stereo recording and playback / Second Audio Program (SAP)
Stereo recording and
playback
The VHS Hi-Fi audio system permits high
fidelity recording of MTS STEREO TV
broadcasts.
NOTES:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.
5Q00401AE(32-35)
When an MTS STEREO broadcast is
received, the word STEREO will ap-
pear on the screen and the program can
be viewed or recorded in stereo.
The Hi-Fi STEREO recording procedure
is the same as for normal recordings.
NOTE:
When using a CABLE TV system, stereo TV programs may be
transmitted over a mono cable channel. In this case the word
"STEREO" will not appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO video tape, press AUDIO SELECT to select how
the audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
stereo broadcast or videotape audio is of poor quality. The "R" and "L"
positions allow the audio from the Right or Left Hi-Fi channel to be heard
over both TV speakers. This button has no effect when viewing a MONO
video tape or TV program. Each time when you press the button, OUT-
PUT SELECTION display appears on the screen for several seconds.
Refer to the chart below.
OUTPUT
SELECTION
STEREO
L ch
R ch
MONO
Second Audio Program (SAP)
Your TV/VCR/DVD is fitted with a SAP broadcast system which
enables you to switch to a second audio program when view-
ing a selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1
Press TV MENU in the TV/VCR mode. Then press
select option. Press
press .
2
Press or
Then press
Then press TV MENU until the
menu screen is cleared.
Listening to SAP
When the TV/VCR/DVD is turned on or a channel selection is made,
make certain the letters "SAP" appear on the screen. This means
that the "Second Audio Program" broadcasting is available.
STEREO SAP
33
STEREO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
or to select "AUDIO", then
to select "SAP".
or to select "ON".
/ /
SAP
OR
26/5/04, 10:46
or to
BASS 0
TREBLE 0
BALANCE 0
SURROUND OFF
STABLE SOUND OFF
SAP ON
/ CANCEL / MENU
/
33