TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
1
While in the Stop mode, press the
PROG./EQ/ENTER button. The track
number will blink and "P-01" will appear
in the display.
3
Press the
PROG./EQ/ENTER
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 24 tracks.
NOTES:
•
To clear the memory, while in the Stop mode, press and hold the MODE/
CLEAR button until "P" disappears from the display.
•
MP3: If an MP3 CD is inserted, you will first select the directory number in
step 2 followed by the PROG./EQ/ENTER button, and then the file/track
number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
CD OPERATION (CONTINUED)
button to
2
Select a track to be programmed using the
Skip (o)/√ 1 or (n)/® 2 button. If using a
MP3 disc, see note below.
4
Press the PLAY/PAUSE (
ON
button to begin program
/
playback.
13
)/POWER
®p