Water Consumption - Salton SAC18 Instructions And Warranty

USING THE ICE PACKS
• Ensure that the ice packs are filled with water, but no more than two-thirds
full.
• Place the ice packs in the freezer and make sure that they are frozen
thoroughly.
• Place the frozen packs into the water tank with water in. Approximately ten
minutes later, the temperature inside the tank will be 8℃ lower than the
ambient temperature.
• Two ice packs are provided with the air cooler. The cooling effect can last
for up to four hours

WATER CONSUMPTION

• The water consumption rate of the air cooler varies depending on room
temperature and relative humidity
• Please keep the water level at an appropriate level below the "MAX" level.
• Please keep the water level above the "MIN" level when using the cool
function.
• Please disconnect the power supply while adding water.
OPERATING YOUR AIR COOLER
• On/Off: Pressing the "On/Off" button while in standby mode, switches the
unit on. Pressing the button again returns the unit to standby.
• Speed: With the unit switched on, repeatedly pressing this button selects
between High, Medium and Low fan speed. The selection is shown by the
panel lights.
• Mode: With the unit switched on, repeatedly pressing this button selects
between Normal, Nature and Sleep wind patterns. The selection is shown
by the panel lights.
• Cool: With the unit switched on, pressing this button activates the cooling
feature. Pressing this button again switches off the feature. The selection
is shown by the panel light being either on or off.
• Swing: With the unit switched on, pressing this button activates the
horizontal swing mechanism that will distribute cooled air around the
room. Pressing this button again switches off the feature. The selection is
shown by the panel light
6