1-4. Standard Accessories
The items listed below are included with the X4 series. For damaged or missing
parts, contact Honeywell Analytics or their agent.
Part No.
2566-0424
2566-0422
2566-0433
2566-0426N
2566-0426L
2566-0480
2566-0445
2566-0443
2566K0130
2566-0420
2. Turning the Detector On and Off
Before turning the detector on for the first time, you will need to install two "AA"
alkaline (Energizer
Batteries).
A sealed rechargeable battery pack (part number 566-048 for the Minimax,
and 566-046 for the Impulse) is also available (See Section Optional
Accessories)
If you plan on logging data and have a memory card, now is also a good time to
install the card (See Section 6- Installing or Removing the Memory Card).
2-1. Turning the Detector On
Press and hold the ON/OFF button for seconds and the detector will turn on.
2-1-1. Displaying the Firmware Version
The detector will display the version of the firmware.
X4 Series
Calibration Certificate
Quick Start Guide
Alkaline Batteries (1.5V AA), Energizer
Flow Adaptor (Neotronics)
Flow Adaptor (Lumidor)
Protective Rubber Boot (Neotronics)
Protective Rubber Boot (Lumidor)
Tubing (45 cm/18")
Crocodile Clip Kit
Manual
E91 or EN91) batteries (See Section 6-1 Replacing the
®
Description
E91 or EN91
®
Qty
1
1
2
1
1
1
1
1
1
1
1