Advertisement
Loudspeaker Installation
Unpacking Your
Loudspeakers
Attaching the
Spikes to
Floorstanding
Model -
ELYSIAN 4
Levelling the
Loudspeakers
Looking After
Your
Loudspeaker
14
Please read this manual as soon as you have opened the carton.
Lift the loudspeaker carefully out of the packing. Do NOT try to lift the loudspeaker using
the cloth bag.
Unpack any accessories carefully.
If there is any sign of damage or if the contents are incomplete, report this to your dealer
as soon as possible.
Retain the packing for future safe transport of the product. Dispose of the packing with
respect to any recycling provisions in your area.
Make sure you have plenty of unobstructed working space and assistance for lifting and
moving the speaker.
Place a soft cloth or protective material on the floor to protect the loudspeaker.
Invert the loudspeaker onto the cloth or protective surface.
Thread a locknut onto each spike and loosely fix it up the thread.
Thread the spikes into the spike inserts. Tighten them by hand until tight (do not use
mechanical or power assisted tools for tightening)
Invert the loudspeaker to the upright position. Be careful not to damage the floor with the
spikes.
When the speaker is upright, with the spikes on the floor, you may find that the speaker is
not completely level and/or one spike is not in full contact with the floor.
In this instance; simply adjust the spikes by loosening or tightening as required.
Spike seats are included in the accessories box for use with ELYSIAN 4 feet, or
corresponding ELYSIAN standmount speaker stands.
Spike seats are for use on wood or stone floors etc. Simply place these underneath each
spike to isolate the spike from the floor.
This speaker is hand-finished with a genuine Piano-Lacquer. As with all real wood
furniture finishes; exposure to direct sunlight, heat, cold and varying humidity can affect
the natural properties of the speaker cabinet. We advise protecting the speaker from
extreme variances in temperature and environment conditions.
We advise that you do not place anything on the surface of the cabinets, to protect from
damage. Treated with care, the genuine Piano-Lacquer finish will last a lifetime. They will
age naturally and subtly, retaining the properties of the beautiful high gloss finish.
Your Wharfedale loudspeakers use a specially hardwearing sealed finish. They should not
be waxed or treated with spray polishes which will smear and dim their lustrous finish.
Polish them with a dry or barely moist cloth to remove dust and finger marks, etc.
Occasionally, remove the loudspeaker grilles and brush them gently with a soft brush
before replacing them carefully.
Avoid getting any liquid behind the grille. If you accidentally spill liquid on your
loudspeakers, take them to your dealer for attention before using them again.
Advertisement
