Honeywell OELD Operating Instructions Manual page 6

OELD User Manual (3018M5000_1-3)
1.5 FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-
tions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesir
ed operation.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmit-
ter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-
ment. End users must follow the specific operating instructions for satisfying RF exposure compli-
ance.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable pro-
tection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user's authority to operate the equipment.
1.6 IC Information
This device complies with Industry Canada's lisence-exempt RSSs. Operation is subject to the follow-
ing two conditions:
1) This device may not cause interference; and
2) This device must accept any interference, including interference that may cause undesired opera-
tion of the device
OELD has been tested and meets applicable limits for radio frequency (RF) exposure. Ac-
cording to the RF Exposure report, minimum 20 cm separate distance is required.
WARNING
Revision 1, Issue 3