4
4.2
Conversion to a
different gas
category ADM 135
4.2.1
Legend
Only applicable numbers are
mentioned.
1. burner pressure regulator
7. gas control
9. high-low control
36
Conversion to a different gas category
13. Check the supply pressure and burner pressure
pressure and burner
pressure").
14. Remove the sticker showing the new gas category from the conversion kit,
and attach it below the appliance's rating plate. This clearly indicates that the
appliance may no longer be run on the gas for which it was originally
supplied.
15. Start the appliance
(9 "Starting and
Introduction
This paragraph describes:
•
Conversion from LP gas to natural gas
•
Conversion from natural gas to LP gas
Conversion of gas control
1
is
(3.11 "Checking the supply
running").
9
7
Instruction manual ADM
IMD-0132 R1