Page 4
Product Specification Sheet Video Playback Formats MPEG-1/MPEG-2/MPEG-4 H.264 FLV/RV8/RV9/RV10 Subtitles Formats Support SRT、ASS Music Playback Formats MP3,AAC Picture Playback Formats JPG、JPEG、BMP、PNG Multimedia Pause TV/USB recording (PVR) Applications Time shift PIP/POP USB2.0(*2) USB Harddisk Format (Power) FAT/NTFS (500mA) TV*2/USB*2/VGA*1 /HDMI*3/YPBPR&AV- I/O port to be clearly indicated IN*1/Earphone*1/Coaxial- OUT*1/PC audio*1/Audio in*1 Playback...
Page 5
Product Specification Sheet Operating power consumption 110W (max.) Standby power [Watt] <o.5W AC switch Ambient temperature 5℃-40℃ Net Weight (Product unit only) (add W/O STAND W/O 10.1KG ; W/ Stand)) Gross weight (Product in Packaging) 13.5KG Dimensions (w, h, d) - unit without stand 1126*655*83mm ID Spec 1126*704*214mm...
Page 6
Product Specification Sheet PVC / BFR Free Mercury Free Cabinet Resin ECO Mode Mains Power AC 100-240V 50/60Hz Power/Material Standby Power <0.5W Green packaging (Non-EPS) Light Sensor Picture Mute (For Radio) SCREEN OFF non-EU Energy Label - Standby Label (A/B/C) Dolby Digital/Dolby Digital Plus/Dolby Pulse DTS 2.0+ Digital out DTS Premium Sound...
Page 18
4.按選單鍵退出。 提示:電子節目指南相關信息由廣播公司提供,由於廣播信息在給定的頻道上,節目條目可能顯示為空或 無信息。當新的信息可以使用時,畫面顯示會自動更新。 USB 多媒體功能 請將 USB 存儲設備插入本機 USB 接口,按【訊號源】鍵顯示“訊號源”選單,選擇“USB”訊號源, 按【OK】鍵進入。 注意: ① USB 功能接口支持包括視頻/音頻/圖像等格式的文件,對於某些非標準的 USB 存儲設備,可能會出 現無法識別的狀況,請更換為標準的設備; ② 流媒體系統對每一種播放文件的格式都有一定的限制,如果超過系統限制的話播放將會出錯; ③ 請不要在系統播放過程中拔掉 USB 存儲設備,這樣可能會導致系統或設備出現問題; ④ 本系統支持標準的 USB 1.1 和 USB 2.0 接口傳輸協議的 U 盤和移動硬盤等存儲設備。USB 設備的文 件格式是 FAT 或 FAT32。 ⑤ 本機的 USB 接口提供 5V 電壓,最大電流為 500mA,使用超過 500mA 的存儲設備會影響到多媒體播 放器的正確識別,這屬於正常現象。...
Page 21
限用物質含有情況標示聲明 Declaration of the Presence Condition of the Restricted Substances Marking 設備名稱:LED背光源高畫質顯示器,型號(型式): LE50M3571/69, LE50M3572/69 Equipment name Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 單元Unit 汞 多溴聯苯 鎘 六價鉻 多溴二苯醚 鉛 Mercury Polybrominated Cadmium Hexavalent Polybrominated diphenyl Lead...
Page 22
Factory menu entry: Press MENU, and then press 1999 Primary menu Secondary menu Value,remark MDOE VGA,YPBPR,Selection R-GAIN G-GAIN B-GAIN Front-end gain adjustment ADC ADJUST R-OFFSET G-OFFSET B-OFFSET Clamp level adjustment AUTO ADC ADC automatically adjust Input Source Source Selection MODE Dynamic/Standard/Sotf/User BRIGHTNESS BRIGHTNESS...
Page 23
Vif 3 Vif set Qmap adjsut PQ setting PEQsetting OverScan Overscan_resolution Reselution select Overscan_hsize Adjust overscan H size Overscan_hposition Adjust overscan H position Overscan_vsize Adjust overscan V size Overscan_vposition Adjust overscal V position other Test pattern UART DEBUG DEBUG ON/OFF HDMI CEC/ARC CEC/ARC ON/OFF Backlight...
Page of 14 Troubleshooting Procedure 1. No power Check 220V power supply voltage and the contact of power socket Check AC(220V)voltage and the contact of CN101 socket. Check +5V and +12V output from Replace power cord or power embedded power supply for abnormity socket Abnormal output voltage +5V and +12V from Check +5V and +12V on...
Page 25
3. Protection or without light (refers to the disappearance of image several seconds after the emergence of image) image disappeared immediately after emergence; check the plug of high-voltage switch board for striking sparks and poor contact No problems identified, replace high-voltage If there is spark striking, board;...
Page 26
5. White screen after power-off (work normally when power on, but when power-off or no signal input, the screen shows a white screen) Check whether there is change of voltage at the high voltage board controlled by main board when power-on and power-off Check whether the voltage change of the control pins on Check whether the voltage of the pin on main chip the plug interface of high voltage board is normal when...
Page 27
7. Poor sound Poor sound refers to without sound or with noise; check whether the selection of sound system is proper Switch to other audio input, check whether DVD No sound; check whether remote control mute is input and PC main board input has sound selected and switch sound system No sound for other inputs;...
Page 28
9. Poor embedded power supply of TV Power on, check embedded power supply 5VSB in TV for 5V voltage output High electrical level existed at Check power supply line for looseness, check indictor for STB (higher than 2.5V) working and power supply socket for looseness Check +5V ,...
Page 29
glass of the pressed portion is not damaged, the liquid crystal body can not display normally, with spot or block black defect. 10.6 Screen mess: irregular color display arising from damage of driving plate in LCD.
Page 30
MSD3463 software upgrades (After Service) 1、 Software upgrade tools and materials u AC100~240V power supply and power cord USB flash disk(2.0 version,Capacity not more than 2G) 2、 Preparatory work before the upgrade Recorded all the ADC and the white balance data of all the message source in factory menu before upgrade(FLASH initialization may occur after the upgrade, flush color calibration data, then restore the data you have been recorded): 1.
Page 31
Software update menu will pop up when press confirm key, then select “Yes” to confirm: The process of software updating:...
Page 32
Method 2:Keep pressing VOL+ and CH+ keys on the machine panel, power on the machine, the standby light flashes quickly after about 5 seconds, standby light extinguish and turn into lighting after about a minute, means that the upgrade is completed. 3.3.
Page 33
To VGA interface To computer USB Direction of switch (2). Insert the Mstar USB Tool into the USB port of your PC. The PC can recognize the new device. You can choose to install it in the list, or choose to install at a specified directory and specify the path to the drive file. See the figure below:...
Page 35
(3) When PC finds the drive file, it will give the prompts as in the figure below during the installation process. Please click “Continue" to go ahead. The system will go through three drive installation processes, including Mstar USB Debug Tool A, Mstar USB Debug Tool B, and Mstar USB SerialPort.
Page 36
c. Click Connect button, If it prompts "Device Type is ******" means that connect normally; If it prompts "Program File Not Ready!" means that there is poor connection, please have a check. d.Click "Read" button, then click "Read" button again to load the current mainboard software. The file’s suffix .bin must be...
Page 37
Status bar If select All Chip option carelessly execute loading action, it will erase CI+KEY on mainboard. So CI+ KEY must reload after software upgrading. f.Then press "RUN" button to burn software. When display “PASS” after burning, means that software has burnt successfully.
Page 38
Never plug or unplug the connection lines in the burning process. Please turn the power switch to “Off” when installing ISP board. Pull out the power cord from the machine and then pull out the burning adapter from the machine, when burning completed, change the TV and click Run button to burn next machine.
Page 39
(2). Insert signal cable to the machine, switch to the PC message source. (3). Run the KTC-LCD test software, switch to the mosaic picture and best resolution. Press MENU key to popup the main menu, and then press 8202 number keys to enter the factory menu, press the shift douwn key to ADC ADJUST option to press OK key to enter the next level menu.
Page 40
Change R-GAIN/G-GAIN/B-GAIN value and R-OFFSET/G-OFFSET/B-OFFSET value to the value before the upgrade under the YPbPr(SD/HD) mode (6). Complete the ADC ADJUST debugging, press MENU key succession to exit the factory built-in menu to save the adjusted data, and then restore the original packaging.