Table of Contents
Advertisement
Setup
Calibrate the machine. (Only necessary on initial plug in of machine or if water pressure
changes).
Right after plug in, settings icon will appear, press all three buttons at once.
if you miss this menu, unplug and try again.
Create your own recipe
Note: the maximum dispense of the ColdBRU is 10.5 Litres/2.75 Gallons (US). To avoid
overfilling the ColdBru, we suggest starting with a medium sized brew and adjusting based on
your results. If you achieve less than this, you should repeat the brew, grinding finer, or increasing
the coffee dose to create a deeper bed.
Suggested starting point for New recipe (medium capacity brew) for ColdBru:
•
800g medium ground coffee.
•
5000ml/1.3 Gallons (US) water.
•
02:00hr Brew Time (this refers to the water delivery time, overall contact and drain time will
vary).
•
Initial pulse should be set to 60% total volume, ideally this will create a head of brew water
above the coffee bed. Initial pulse value can be increased if necessary.
8
Weigh water
-SERVICE MENU-
1. Set security PIN
2. Calibrate flow meter
Next
Input weight into machine
Start
Advertisement
Table of Contents
