BMW X5 2017 Owner's Manual page 207

2. Press shift paddle + again to enter coasting
mode.
To deactivate, press shift paddle - .
Display
Display in the instrument cluster
The mark in the efficiency dis‐
play below the tachometer is
backlit in blue and is located at
the zero point. The tachometer
approximately indicates idle
speed.
The coasting point indicator is illuminated at
the zero point during coasting.
Display in the instrument display
The mark in the efficiency dis‐
play is backlit in blue and is lo‐
cated at the zero point.
The coasting point indicator is il‐
luminated at the zero point dur‐
ing coasting.
Indications on the Control Display
The coasting driving condition is displayed in
EfficientDynamics Info while this driving mode
is active.
Color code blue, arrow 1, and symbol, arrow 2:
driving condition coasting.
Displaying EfficientDynamics info
1. "Vehicle info"
2. "EfficientDynamics"
Online Edition for Part no. 01 40 2 973 026 - VI/16
Saving fuel
3. "EfficientDynamics info"
Deactivating the function manually
The function can be deactivated in the Config‐
ure ECO PRO menu, e.g., to use the braking
effect of the engine when traveling downhill.
Settings are stored for the profile currently
used.
System limits
The function is not available if one of the fol‐
lowing conditions applies:
▷ DSC OFF or TRACTION activated.
▷ If cruise control is activated.
▷ If driving in the dynamic limit range.
▷ If driving on steep uphill or downhill grades.
▷ If the battery charge state is temporarily
too low.
▷ If the vehicle electrical system is drawing
excessive current.
Driving tips
207