Replacing the computer base
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the computer base with the screw holes on the palm-rest assembly.
2. Replace the two (M2.5x6L) screws that secure the computer base to the palm-rest assembly.
3. Replace the (M2x3) screw that secures the computer base to the palm-rest assembly.
4. Replace the eleven (M2.5x6L) screws that secure the computer base to the palm-rest assembly.
Post-requisites
1. Replace the
rear-I/O
2. Replace the
wireless
card.
3. Replace the
solid-state
4. Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
cover.
drive.
After working inside your
25