Table of Contents
Advertisement
Options Adjustments
Options
Off-timer function
Onscreen display
Initial INPUT
Initial VOL level
Maximum VOL level
INPUT lock
Studio W/B
Advanced PIP
Display size
Options
Button lock
Remocon User level
ID select
Remote ID
Serial ID
Slot power
V. lnstallation
Rotate
Press or button to switch between
modes.
Off
On
Off
Does not rotate the image.
On
Rotates the image 180 degrees.
Note:
This mode is available except for TH-
37PWD8GK/S, TH-42PWD8GK/S, TH-
37PHD8GK/S, TH-42PHD8GK/S.
Press
or
button to switch between
modes.
Off
On
Sets the panel ID Control.
Off
Disables external control by the ID.
On
Enables the external control by the ID.
Normalization
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote
ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the
button on main unit together with
"SHIPPING" menu is displayed and the lock is released when it disappears.
40
1/2
Press
Enable
Off
On
Sets normal two screen display mode (see page 20).
Off
On
Off
0
Off
0
Sets Advanced PIP mode (see page 21).
Off
Notes:
Off
Off
• When "INPUT lock" is "On", you cannot use all the two screen
Off
•
2/2
Off
Off
Press
0
Off
Off
Adjusts the image display size on screen.
Off
Off
Off
Sets the normal image display size on screen.
Off
On
Sets the image display size approximately 95 % of the normal
image display.
Notes:
• This setting is valid only when the input signals are as follows;
• This setting is invalid when two screen display, digital zoom or
• When Display size is set to "On", Pos. /Size adjustment cannot
• Refer to each board's operating instruction for DVI, SDI, HDMI's
Sets panel ID number when panel is used
in "Remote ID" or "Serial ID".
Set value range: 0 - 100
(Standard value: 0)
Press
Off
Disables ID remote control functions.
You can use normal remote control operations.
On
Enable ID remote control functions.
button on the remote control and hold for more than 5 seconds. The
or
button to switch between modes.
Off
On
display functions.
,
buttons are unavailable during Advanced PIP mode
operation.
or
button to switch between modes.
Off
On
Off
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i,
1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component
Video, RGB, DVI, SDI, HDMI)
Multi screen is selected.
be used.
corresponding signals.
or
button to switch between modes.
Off
On
On
Advertisement
Table of Contents
