Table of Contents
Advertisement
4.
Locate the CPU cut
edge (the corner with the
pinhole noticeably mis s-
ing). Align and insert the
CPU correctly.
5.
Press the lever down.
6.
Apply thermal grease on top of the CPU.
7.
Put the CPU Fan down
on the retention module
and s nap the four reten-
tion legs of the cooling
fan into place.
8.
Flip the levers over to lock the heat sink in place.
9.
Connect the CPU Cool-
ing Fan power cable to
the CPUFAN1 connec-
tor. This completes the
installation.
Note: CPU fan and heatsink installation procedures may vary with the type of
CPU fan/heatsink supplied. The form and size of fan/heatsink may also
vary.
16
Advertisement
Table of Contents
