Table of Contents
Advertisement
• Any modification of the appliance that has not been approved in writing by the testing authority
violates CSA-B365 (Canada), and ANSI NFPA 211 (USA).
• DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION
DUCTWORK UNLESS SPECIFICALLY APPROVED FOR SUCH INSTALLATION.
• DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
• Connect this stove only to a listed factory-built chimney for use with solid fuel or to a lined
masonry chimney conforming to national and local building codes.
• If required, a supply of combustion air shall be provided to the room.
1.1
Mobile Home
• Some appliances may be installed in a mobile home. The installation requires a fresh air kit,
sold separately.
• WARNING : DO NOT INSTALL IN THE SLEEPING ROOM OF A MOBILE HOME.
• IF INSTALLATION OF THIS PRODUCT IS PERMITTED IN A MOBILE HOME, IT MUST BE
SECURED TO THE STRUCTURE.
• CAUTION : WHEN THE INSTALLATION IN A MOBILE HOME IS ACCEPTED, THE
STRUCTURAL INTEGRITY OF THE MOBILE HOME FLOOR, WALL, CEILING AND ROOF
MUST BE MAINTAINED.
• IT IS PROHIBITED TO USE THIS WOOD STOVE WITH A FIRE SCREEN IN A MOBILE
HOME.
1.2
Regulations Covering Stove Installation
When installed and operated as described in these instructions, this wood stove is suitable for
use as a freestanding heater in residential installations.
In Canada, the CSA-B365 Installation Code for Solid Fuel Burning Appliances and Equipment
and the CSA-C22.1 Canadian National Electrical Code are to be followed in the absence of local
code requirements. In the USA, the ANSI NFPA 211 Standard for Chimneys, Fireplaces, Vents
and Solid Fuel-Burning Appliances and the ANSI NFPA 70 National Electrical Code are to be
followed in the absence of local code requirements.
This stove must be connected to a chimney complying with the requirements for Type HT
chimneys in the Standard for Factory-Built Chimneys for Residential Type and Building Heating
Appliances, UL 103HT and ULC S629 or to a code-approved masonry chimney with a flue liner.
1.3
Location of the Certification Label
Since the information given on the certification label affixed to the appliance always overrides
the information published, in any other media (owner's manual, catalogues, flyers, magazines
and web sites) it is important to refer to it in order to have a safe and compliant installation. In
addition, important information about the stove can be found (model, serial number, etc.). The
certification label is located on the back of the stove.
It is recommended to note the stove serial number on page 1 of the Wood Stove Installation and
Operation Manual since it will be needed to precisely identify the version of the appliance in the
event replacement parts or technical assistance is required.
Page 6
Wood Stove - Owner's Manual
Advertisement
Table of Contents
