Siemens SN25ZI49CE Information For Use page 46

Hide thumbs Also See for SN25ZI49CE:
Table of Contents

Advertisement

en Troubleshooting
Fault
E:32-00 will light up
alternately or indicator
for water supply lights
up.
E:61-02 will light up
alternately.
E:61-03 will light up
alternately. Water is
not drained.
46
Cause and troubleshooting
Remove the filter from the supply hose
5.
Clean the filter.
6.
Re-insert the filter in the supply hose.
7.
Screw the water connection back on.
8.
Check the water connection for leaks.
9.
Restore the power supply.
10.
Switch the appliance on.
11.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
Clean the wastewater pump.
1.
→ "Clean wastewater pump", Page 51
Secure the cover of the wastewater pump so it
2.
clicks into position.
→ "Clean wastewater pump", Page 51
Not an appliance fault. Siphon connection is still
closed or the wastewater hose is kinked or blocked.
Check the connection to the siphon and open if ne-
1.
cessary.
Install wastewater hose without kinks.
2.
Remove residues.
3.

Advertisement

Table of Contents
loading

Table of Contents