Controls And Functions - Mx Onda MX-PG2202X User And Installation Manual

- Check that the plate is adapted to the type of gas used.
- Verify that the gas supply pressure is within the values
specified in the corresponding section of the manual.
- To prevent damage to the inside of the plate, connect the
gas inlet so that it is not forced.
- If you need to use the 90 ° elbow or the adapter for the
flexible hose, do not forget to place the insulation joints as
well as the subsequent verification of absence of gas leaks.
• In case of failure, anomalies, if the hob, burners or supports
have fallen and deteriorated, do not use the device and do not
try to repair it on your own. Contact the nearest MX ONDA
Official Technical Service.

CONTROLS AND FUNCTIONS

1
2
1. Control lower cooking zone
2. Control of higher cooking zone
3. Large cooking zone (Triple ring)
4. Medium cooking zone (Semi fast)
5. Electric ignition
6. Safety sensor: Activated if the flame is accidentally
off (spills, drafts, etc.), interrupting the gas supply
to the burner.
4
3
4