Table of Contents
Advertisement
CHAPTER -9: TROUBLESHOOTING
All repair operations required for your machine should be
carried out by an authorized service provider. If your
machine requires repair or if you cannot solve the issue from
the information provided as follows:
•
Unplug your machine.
•
Turn the water faucet off.
FAULT
Your machine does
not start.
Your machine does
not intake water.
(*) See the chapter regarding maintenance and cleaning of
your machine.
POSSIBLE
CAUSE
It is not plugged in
Fuse blown.
Electricity cut-off.
Start/Pause button
not pressed.
Programme dial
'stop' position.
The machine door is
not completely closed.
Water tap is turned off.
Water inlet hose
may be twisted.
Water inlet hose
clogged.
Valve inlet filter
clogged.
The machine door
not completely
closed.
TROUBLE-
SHOOTING
Plug it in.
Replace the fuses.
Check mains power.
Press Start/Pause
button
Switch the programme
button to the desired
position.
Close the machine
door.
Turn your faucet on.
Check water inlet
hose and untwist.
Clean water inlet hose
filters. (*)
Clean the valve
inlet filters. (*)
Close the machine
door.
69
69
Advertisement
Table of Contents
