KX-TG9331BXT/KX-TGA931BXT/KX-TGA930BXT
4.4.6.
Auto Disconnect Circuit
Function:
This circuit is used to detect the fact that another telephone connected to the same line is OFF-HOOK while the unit is in a
receiving status or OGM transmitting status.
Circuit Operation:
The voltage of pin 90 of IC501 is monitored. If a parallel-connected telephone is put into OFF HOOK status, the presence/
absence of a parallel connection is determined when the voltage changes by 0.2 V or more. When the set detects the parallel-
connected telephone is OFF HOOK status, the line is disconnected.
You can enable or disable the Auto Disconnect function.
See Check Record (P.52)
16