Operation Instruction; General Instructions; Control Button - AOC 2210S Service Manual

22" LCD Color Monitor
3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at the front of the panel
of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
-
3.2 Control Buttons
3.2.1 Key Control
3.2.2 Key Function
1. DDC-CI
2. Auto Config
3. Eco Mode/ down
4. Up
5. Menu / Enter
6. Power Button & Indicator
OSD Settings

Press DDC-CI button continuously for 7 seconds to turn on the DDC-CI function.

Press the MENU-button to activate the OSD window.

Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU
button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu
functions. Once the desired function is highlighted, press MENU-button to activate it.

Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you
want to adjust any other function, repeat steps 2-3.

OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor
is off and then press power button to turn the monitor on.
6
AOC 2210S