Canon MB5450 Series Online Manual page 460

3. Select Paper Source
From Paper Source, check the setting or select a new paper source.
The current printer settings appear in Media Type and Page Size.
4. Apply settings
To apply the printer settings to the printer driver, click Set.
Note
• If the media type on the printer is set to Hagaki, Ink Jet Hagaki, or Hagaki K or if the output
paper size on the printer is set to 2L/5"x7"(13x18), click Set to display the dialog box.
Select the media type and paper size that matches your purpose, and then click OK.
• If the media type and the output paper size are not set on the printer, Set will be grayed out and
cannot be clicked.
• If communication with the printer is disabled, the Printer Media Information... does not appear
or printer media information from the printer cannot be obtained.
460