Haier HSU-22LEA03 Service Manual page 44

Operation
Timer On-Off Operation
(1)After unit start, select your desired operation mode
Operation mode will be displayed on LCD.
(2) Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
TIMER ON-OFF
TIMER ON TIMER OFF
Select TIMER ON-OFF. "ON" will flash.
(3)Time setting for TIMER ON
Press HOUR button.
Every time the button is pressed, time increases 10 min.
If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 10 min.
If button is kept depressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
AM refers to morning and PM to afternoon
(4) Time confirming for TIMER ON
After time setting, press TIMER button to confirm.
"ON" stops blinking, While "OFF" starts blinking.
Time displayed: Unit starts at x hour x min.
(5)Time setting for TIMER OFF
Follow the same procedures in "Time setting for TIMER ON".
(6) Time confirming for TIMER OFF
After time setting, press SET button to confirm, "OFF" stops flashing
Time displayed: Unit stops at X hour X min.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
HSU-22L/HEA03
blank
TIMER ON-OFF
41
: http://splitoff.ru/tehn-doc.html
System Configuration
ON/OFF TEMP
1
MODE
SET
6
3
FAN
TIMER
5
4
2
SWING CLOCK
SLEEP HEALTH
LOCK RESET