Table of Contents
Advertisement
Installing a VESA base
Connecting Your
Monitor
Installing the
Monitor Driver
Installing a VESA
base
1. Remove the four screws(1) and then remove the Stand from the LCD monitor.
2. Align the four bolt holes (2) on the back of monitor with the holes(3) on the VESA base and then
The monitor supports VESA mounting standard for use with various VESA mounting devices.
This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad.
fasten the base with the four bolts (4) supplied.
Only the supplied bolts should be used.
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.
English > Main > Setup > Installing a VESA base > Installing VESA base
Advertisement
Table of Contents
