Single Loudspeaker Suspension Using M10 Eyebolts - Electro-Voice MTS Installation Manual

24 en | Designing an MTS array
Refer to
–
5.3.1

Single loudspeaker suspension using M10 eyebolts

Suspend MTS loudspeaker models individually using the M10 suspension points.
MTS is a very heavy loudspeaker. A minimum of 4 points must be used to suspend the
speaker, 2 points minimum per planar surface.
–
–
2021-09 | V01 | F.01U.386.524
Suspension, page 4
Use correctly rated shoulder eyebolts for proper suspension. Bolts in the Electro-Voice
EBK-M10L-4HS High-Strength 45mm Eyebolt 4 Pack are ideal.
Follow the instructions for safe suspension provided by the Eyebolt manufacturer in
conjunction with this manual.
Installation manual
MTS High Output Point Source
M10
– Bridal suspension must not exceed
60°.
Electro-Voice