Names And Functions Of The Components - JRC JFE-582 Instruction Manual

2. Names and Functions of the Components

This section describes the names and functions of the control panel and its controls.
!2 i
DEPTH
ALARM DEPTH
ACK ALARM
!0 o
No. Name
①
Power/Brightness
②
Depth range (+)
③
Depth range (-)
④
Recording line
⑤
Menu setting (+)
⑥
Menu setting (-)
⑦
Select menu item
⑧
Depth alarm (+)
⑨
Depth alarm (-)
⑩
Cancel depth alarm
⑪
Power failure warning lamp
⑫
Depth warning lamp
⑬
LCD display
Note 1: Longitude and latitude, date, and time are recorded from data input from external navigation
equipment.
6 2. Names and Functions of the Components
SELECT
!3 u
Figure 2-1 Control Panel
Switches the equipment power on and off, adjusts the
brightness of the panel and plotter illumination, and stops the
buzzer from sounding in the event of a power fail alarm.
Switches the depth range to deep.
Switches the depth range to shallow.
Prints a vertical line on the recording paper while the key is pressed
and held. When the key is released, the water depth and longitude
and latitude, date, and time (* see Note 1) are printed.
Increases the value of the item selected from the menu.
Decreases the value of the item selected from the menu.
Selects an item from the menu.
Switches the depth alarm to deep.
Switches the depth alarm to shallow.
Cancels the buzzer that sounds when a depth alarm occurs.
The warning lamp blinks in the event of a power failure.
The depth-warning lamp blinks in the event of a depth alarm.
Displays water depth and other settings.
t w
SET MARK RANGE
y r e
Function
!1
PWR FAIL
PWR/PANEL
OFF
q