Gps Status Screen Structure - Second Page - Magellan RoadMate 3000T Reference Manual

17 ILL_DEFINED_2D_MATRIX 2X2 matrix can not be inverted in 2D fix
20 NO_SAT_TIME no satellite time
23 NOT_ENOUGH_SATS
24 CANNOT_SELECT_FIX_TYPE
30 VELOCITY_2D_ONLY
31 BAD_VELOCITY_PDOP
32 TOO_MANY_SATS_FOR_2D_VEL there are 4 or more satellites, but 2D fix provided
51 WRONG_NUMSAT number of satellite for fix > 12 or less 2
56 LOOP_3D_NOT_CONVERGING 3D initial fix is not convergent
57 MILLISECOND_ERROR
58 LOOP_2D_NOT_CONVERGING 2Dinitial fix is not convergent
59 BAD_RANGE_CHITEST; range post-fix residuals chi-test failed
60 BAD_DOPPLER_CHITEST doppler post-fix residuals chi-test failed
61 OSC_DRIFT_ERR
62 BAD_DOPPLER_ERR
63 BIG_RANGE_RESID
64 BIG_DOPPLER_RESID 0.7m/s
65 HUGE_RANGE_RESID
66 HUGE_DOPPLER_RESID
Usually, Bad code is 20 and 23. If fix is good, it would be 0.

GPS STATUS Screen Structure - second page

Heading XXX (degree)
Current Lat: DDD.DDDDD W/E
Current Long: DDD.DDDDD N/S
Current altitude XXXX (altitude in mean sea level meter)
#Satellite (U/T) XX/XX (the number of satellite used and tracked)
PDOP XX.X (Position Dilution Of Precision)
VDOP XX.X (Vertical Dilution of Precision)
TDOP XX.X (Time Dilution of Precision)
HDOP XX.X (Horizontal Dilution of Precision)
FOMS P/V/H (Figures Of Merits for position, velocity and heading in map matching)
UTC TIME MM/DD/YY HH:MM:SS(UTC time without local zone)
no enough satellite for 2D or 3D fix
2 satellite fix only for velocity, no position fix
50 too big pdop for velocity
millisecond jump happened
too much clock drift 60HZ for XO, 7.5HZ for TCXO
too big Doppler errors 4m/s
110m/40m depend on virtual ttagl/ DGPS factors
10km normal for postfit residuals for range
100m/s normal for postfit residuals for doppler
Speeding XX.X (meter per second)
(current latitude, degree)
(current longitude, degree)
Appendix
TTFF XXXXs (Time-To-First-Fix in second)
93