Advertisement
Product Features
Introduction
Wrist Strap
Connection
Belt Clip
Battery
Compartment
Antenna
Battery Door
External Speaker/
Microphone Jack
Talk
Button
Light/Max
Range
Button
A2 English
Introduction
Features
• 2-Way Radio
With a range up
to six (6) miles
(10 km).
• 22 Channels
Seven (7) shared
with FRS/GMRS,
Latch
seven (7) FRS
only, eight (8)
GMRS only.
• 38 Privacy Codes
• Ten (10) Channel
NOAA All Hazards
Radio
• Hands-Free
On/Off
Operation (VOX)
Power
• Backlit LCD
Button
Display
• Scan
Lock
Channel,
Button
privacy code
• Water Resistant
Channel
• Speaker/
Up/Down
Microphone Jack
Button
• Call Alert
Backlit
Ten (10)
LCD
selectable tones
Display
• Button Lock
• Roger Beep
Volume Up/
Selectable On/Off
Down Button
• Battery/
Mode
Power Saver
Button
• Auto Squelch
• Maximum
Call
Range Extender
Button
• Belt Clip
Speaker/
Microphone
A3 English
Product Features
Backlit LCD Display
Lock
Icon
Roger
Beep Icon
VOX Icon
Low
Battery
Power Icon
Low
Receive/
CTCSS Privacy
Transmit
Code Numbers
Tower Icon
Main
Channel
Scan Icon
Numbers
Power
NOAA All
Saver Icon
Hazards Radio Icon
Important FCC Licensing Information
This radio operates on General Mobile Radio
Service (GMRS) frequencies which require a
Federal Communications Commission (FCC)
license. See page 14 for licensing and other
related information.
Introduction
Operation
Customer Assistance
Caring For Your microTALK
®
Radio
Your microTALK
®
radio will give you years of trouble-free service
if cared for properly. Handle the radio gently. Keep the radio away
from dust. Never put the radio in water or in a damp place.
Avoid exposure to extreme temperatures.
Batteries
Remove Belt Clip
To Install Or Replace Batteries:
1. Remove belt clip by releasing belt clip
latch and sliding clip up.
Pull Down Lock Latch
2. Pull down on the battery door latch to
remove the battery compartment cover.
3. Insert four (4) AAA batteries. (Always use
high quality alkaline batteries.) Position
batteries according to polarity markings.
Insert Batteries
4. Replace battery compartment cover and
belt clip.
Contact your local Cobra
®
dealer or Cobra
directly for optional accessories. Only Cobra
authorized accessories are recommended.
The Basics To Get You Started
Your microTALK
®
radio is easy to use.
To get started, simply:
1. Press the Power button to turn On your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to the
same channel to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
Nothing comes close to a Cobra
Warranty
•
•
®
®
®
1
Advertisement
