Table of Contents
Advertisement
Preferences
Setting Alarms
1.
Press MENU.
Use the Arrow joystick to highlight Preferences.
2.
3.
Press ENTER.
Use the Arrow joystick to highlight Alarms.
4.
5.
Press ENTER.
6.
Use the Arrow joystick to highlight the alarm field that you want to turn off or set.
7.
Press ENTER.
8.
Select from the list of available distances the distance that you want the alarm alert to come on or
select Off to turn off the alarm.
Note that the GPS Fix alarm does not offer any distance, just On or Off.
9.
Press ENTER.
Setting the Clock
Under normal usage, you should never need to change the clock setting unless you cross over into a new time
zone. The eXplorist receives its clock information from the atomic clock located in the GPS satellite and is
extremely accurate.
Other then changing the time for when you cross time zones, you can also set the format that the time is
displayed as well as select the daylight savings time settings.
Setting the Time & Format
To adjust the time you must first select a format that the time will be displayed in. If the format you are
presently using is the format you want to keep, you still need to verify the format before you can set the clock.
1.
Press MENU.
Use the Arrow joystick to highlight Preferences.
2.
3.
Press ENTER.
Use the Arrow joystick to highlight Clock.
4.
5.
Press ENTER.
Use the Arrow joystick to highlight the Format field.
6.
7.
Press ENTER.
Select Local 24 Hrs, Local AM/PM, or UTC.
8.
9.
Press ENTER.
10.
With the clock field highlighted, press ENTER.
11.
Use the Arrow joystick to set the time.
(Up/down changes the value at the cursor location; left/right moves the cursor.)
12.
When the time is set properly, press ENTER.
With the Done button highlighted, press ENTER.
13.
88
Hide quick links:
Advertisement
Table of Contents
