Magellan Crossovergps Poi Manager; Latitude; Longitude - Magellan CrossoverGPS 2500T Instructions For Operating Manual

Magellan CrossoverGPS POI Manager

The Magellan CrossoverGPS POI Manager enables you to transfer custom points of
interest files from your computer to your Magellan CrossoverGPS.
Before we add any custom POI's to the Magellan CrossoverGPS, you should understand
how the POI Manager plots POIs.

Latitude

Latitude can be expressed by dividing Earth into
horizontal segments totalling 180 degrees.
Starting at the Equator, or zero degrees Latitude,
lines (or Parallels) are drawn in 10-degree
increments 90 degrees to the north and 90
degrees to the south. If your location is below the
Equator, you are at a South Latitude.

Longitude

Conversely, longitude lines can be expressed by
dividing Earth into vertical segments totalling
360 degrees. Starting at the Prime Meridian
(which is The Royal Observatory in Greenwich,
England), or zero degrees Longitude, lines are
drawn in 10-degree increments 180 degrees to
the West and 180 degrees to the East. If your
location is on the western hemisphere, you are at
a West Longitude.
Additionally, to narrow down your location
further, each 10-degree segment is divided into 60 smaller segments called minutes and,
still further, each minute is divided into 60 segments called seconds.
To express this in coordinates, the city of Los Angeles is located at 34° (degrees) 03'
(minutes) and 08 (seconds) North of the Equator, and 118° (degrees) 14' (minutes) and
42 (seconds) West of the Prime Meridian.
Magellan POI Manager
90° (North Pole)
0° Equator
10°
20°
30°
40°
50°
60°
70°
80°
90° (South Pole)
West Longitude
70° 50° 30° 10° 10° 30° 50° 70° 90°
90°
80° 60° 40° 20° 0° 20° 40° 60° 80°
East Longitude
80°
70°
60°
50°
40°
30°
20°
10°
0°
47