Setting Your Base Camp; Going To Your Base Camp; Creating A Goto Route From The Map Screen - Magellan CrossoverGPS 2500T Instructions For Operating Manual

Setting your Base Camp

1. Tap
2. Select Change Basecamp.
Note: If this is the first time you have accessed the Base Camp function you will
be asked to either select the port from the map or enter it's latitude and longitude.
3. Select Select on Map to visually place your port on the map or Enter Lat/Lon to
type in the latitude and longitude for your port.
4. Use the method selected to locate or enter the base camp's position.
5. Tap on any of the fields to edit the name, lat/lon, altitude or information.
6. Tap Favorite to include this waypoint in your Favorites list.
7. Tap Save.

Going to your Base Camp

1. Tap
2. Select Goto Basecamp.
3. The Map screen is displayed with a Goto route line displayed. Navigate along this
line to return to your basecamp.

Creating a Goto Route from the Map Screen

1. Pan the cursor along the map to the location you want to go to.
2. Tap
3. Tap Go To.
4. The Map screen is displayed with a Goto route line displayed. Navigate along this
line to go to your destination waypoint.
Outdoor Navigation
36