Table of Contents
Advertisement
5. Getting started
5.1 Charging
• Charge your smart watch fully before using it for the first time.
• Connect the charging cable to a free USB port on your computer or a USB charger and the charging
contact
[5]
on your smart watch. To do this, consult the operating instructions for the USB charger you
are using.
note
• The charging time for a full battery charge is around 90 minutes. As soon as the battery shown in
the display is fully charged, the charging process is complete and you can disconnect your smart
watch from the charging cable.
• When the battery charge level reaches only 10%, please charge the smart watch in order to avoid
limited functionality. When the battery level is below 20%, you can no longer start an activity, and
when the battery level is below 10%, the automatic heart rate measurement function is deactivated.
5.2 Putting on and turning on
• Before putting on and turning on your smart watch for the first time, you must connect it with the
enclosed charging cable and plug it into a power source.
• After successful charging, put your smart watch on your wrist and close the wristband
clasp [4].
• Hold the control button on the side
note
• To use the measuring functions most effectively, your smart watch should be positioned close to the
skin on the top of the forearm but still be pleasant to wear. The distance between the smart watch
and the bones of the wrist should be about one finger breadth.
• To ensure the best possible recording of your activities, wear your smart watch on your left wrist if
you are right-handed and on your right wrist if you are left-handed.
5.3 Turning off
• To turn off your smart watch, switch to the
and tap
[TURn OFF
watch.
[1]
down for 3 seconds to start your smart watch.
3 sek.
[SETTInGS
]
in the sub-menu. Confirm the subsequent question to turn off your smart
9
GETTInG STARTED
0
14
20
SAT/08
]
menu item (see Section 7.5.15 Settings)
[3]
using the
Advertisement
Table of Contents
