Machine And Manufacturer's Identification Data; Responsibility; Normal Machine Use; Characteristics Of Personnel Trained For Normal Machine Use - Electrolux 720008 Manual

Table of Contents

Advertisement

Safety device
a device (other than a guard) that eliminates or reduces the risk;
it can be used alone or in combination with a guard.
Customer
the person who purchased the machine and/or who manages
and uses it (e.g. company, entrepreneur, firm).
Electrocution
an accidental discharge of electric current on a human body.

2.10 Machine and manufacturer's identification data

A reproduction of the marking or dataplate on the machine is
given below:
F.Mod. JG45A-R
Comm.Mod. V40SGEBK
PNC
9EXT720000
Ser.No. 74810001
W
Ton.
0.1kW
Volt220V
50Hz
Refrigerante/Refrigerant
R600a
0.035kg.
Illuminazione/Lighting0.7w Cap
NFnominal Charge
GWP
CO2-eq 0 t
Electrolux Professional SpA-Viale Treviso,15-33170 Pordenone (Italy)
The data plate gives the product identification and technical data.
When installing the appliance, make sure the electrical connection
is carried out in compliance with that specified on the data plate.

2.11 Responsibility

The Manufacturer declines any liability for damage and
malfunctioning caused by:
non-compliance with the instructions contained in this
`
`
manual;
repairs not carried out in a workmanlike fashion, and
`
`
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the warranty);
operations by non-specialised technicians;
`
`
unauthorised modifications or operations;
`
`
inadequate maintenance;
`
`
improper machine use;
`
`
unforeseeable extraordinary events;
`
`
use of the machine by uninformed and untrained personnel;
`
`
non-application of the current provisions in the country of
`
`
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
Electrolux Professional SPA declines any liability for inaccuracies
contained in the manual, if due to printing or translation errors.
Any supplements to the installation, use and maintenance manual
the Customer receives from the Manufacturer will form an integral
part of the manual and therefore must be kept together with it.
TypeRef.
2017
Cyclopentane
Total
Current
0.55A
MADE INCHINA
Classe/Class ST

3. Normal machine use

WARNING
Refer to "Warning and Safety
Information"
3.1 Characteristics of personnel trained for normal
machine use
The Customer must make sure the personnel for normal machine
use are adequately trained and skilled in their duties, as well as
ensuring their own safety and that of other persons.
The Customer must make sure his personnel have understood
the instructions received and in particular those regarding work
hygiene and safety in use of the machine.
3.2 Characteristics of personnel enabled to operate on
the machine
The Customer is responsible for ensuring that persons assigned
to the various duties:
read and understand the manual;
`
`
receive adequate training and instruction for their duties in
`
`
order to perform them safely;
receive specific training for correct machine use.
`
`

3.3 Operator qualified for normal machine use

He must have at least:
knowledge of the technology and specific experience in
`
`
operating the machine;
adequate general basic education and technical knowledge
`
`
for reading and understanding the contents of the manual;
including correct interpretation of the drawings, signs and
`
`
pictograms;
sufficient technical knowledge for safely performing his duties
`
`
as specified in the manual;
knowledge of the regulations on work hygiene and safety.
`
`
In case of a significant anomaly (e.g. short circuits, wires coming
out of the terminal block, motor breakdowns, worn electrical
cable sheathing, etc.) the operator for normal machine use must:
immediately deactivate the machine.
`
`
23

Advertisement

Table of Contents
loading

Table of Contents