Advertisement
4) Remove the blank cover plate for the ACC1 slot (next to the SYNC card) by removing 1 Phillips-
head screw. Save the screw for installing the OPT•24.
5) Unplug the 2 ribbon cables from the Sync card. Squeeze the tabs on the sides of the connectors and
gently wiggle from side to side to release them from their sockets.
5A) Unplug Ribbon Cables
4) Remove Screw and
ACC1 Slot Cover Plate
REAR PANEL
REAR PANEL
2000
©
™
DESIGNS.
MACKIE
®
FRONT PANEL
from Sync Card
REAR PANEL
REAR PANEL
2000
©
™
DESIGNS.
MACKIE
®
FRONT PANEL
5B) Pull Ribbon Cables back
and out of the way
Installation Guide
3
Advertisement
