Bosch MISTCARE Nexxt 500 Series Operating, Care And Installation Instructions Manual page 19

Additional options
800 Series
i Before setting additional options,
choose a program with the
program selector!
Symbol Function
Sets the delay start time
of the dryer
(Start in .. hours!)
Extra care
(more gentle than
Delicates/low temp.")
Child proof lock (only
effective while the
program is running)
Extra Drying Time
User selectable degree of
dryness
Volume of the end signal
and the damp dry signal
Spin speed optimized
drying time coordinates
the remaining time
displayed for the dryer to
the spin speed at which
the laundry was
previously spun in the
washing machine
All manuals and user guides at all-guides.com
Settings Explanation
0-12 h
(0.5 h steps)
If you have chosen the additional option Extra care" the Delicates/
On/Off
low temp." indicator light illuminates. Pressing the Delicates/low
temp." button cancels the additional option Extra care".
On/Off This additional option allows you to lock your settings to prevent
unintended use of the dryer.To start the dryer when the Safety
guard is active: Press and hold the Start/Stop" button for 4
seconds. To unlock this additional option when the dryer is running:
Press and hold the Start/Stop" button for 4 seconds.
If you have chosen the steps 1 to 3 of the additional option Degree
0, 1, 2, 3
(0=default, 1=dryer,
of dryness" the symbol Z is displayed. 0 is standard setting - sym
3=dryest)
bol Z is not displayed.
Off, Your dryer outputs different signals for certain events. You may
medium,
enable or disable the signal by simultaneously depressing the
maximum
buttons shown.
400 To optimize the remaining time display, the spin speed at which the
600
laundry was previously spun in the washing machine can be
800
entered by the user.
1000
1200
Event
Enable Signal
Disable Signal
Start Cycle
End Cycle
Mal-Operation
Warning of Malfunction
Select the option to be changed with
the Menu" button. Press the button to
move to the next option on the display.
The active symbol starts flashing.
The current active option setting is
displayed on the right.
These settings can now be changed
with the Select" button. Press the
button to jump to the next possible
setting.
i
Pressing the Menu" button again,
saves the previously settings.
If you don't press any button for 10
seconds the settings are saved
automatically.
Signal
Short tone
Two short tones
Short tone
Sequence of short tones
Sequence of long tones
Sequence of long tones (maximum
volume)
19