Mackie S225 Quick Start

HOOKUP DIAGRAMS

Quick-Start
Make all initial connections with the
power switches OFF on all equip-
ment. Make sure all master volume,
level, or gain controls are all the way
down.
1. Connect the line-level outputs from your mixing
console (or other signal source) to the inputs of
your power amplifi er.
Stereo
Power Amplifier
Mixer or
Preamplifier
S225
4
Left Right
Line-level Line-level
Output Output
1202-VLZPRO
S225: WITH A MIXER AND POWER AMPLIFIER
S225
Stereo Power Amplifier
From LEFT
SPEAKER OUT
Stereo Power Amplifier
From LEFT
SPEAKER OUT
S225: WITH A MIXER AND TWO POWER AMPLIFIERS
2. Connect the "Speaker Output" from your power
amplifi er (or powered mixer) to the INPUT connec-
tor on the S225.
3. Turn on your mixing console (or other signal
source).
4. Turn on the amplifi er. Turn up its volume or gain
control(s) as recommended by the manufacturer.
5. Start the signal source, whether it be speaking
into a microphone or starting a CD player. Adjust
the volume controls on the mixer (or other signal
source) for normal operation.
S225 S225
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE "MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004 ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004
SERIAL NUMBER SERIAL NUMBER MANUFACTURING DATE MANUFACTURING DATE SERIAL NUMBER SERIAL NUMBER
S225
From RIGHT
SPEAKER OUT
Line-level
THRU Connection
From RIGHT
SPEAKER OUT
1202-VLZPRO
S225
MANUFACTURING DATE MANUFACTURING DATE
S225