Table of Contents
Advertisement
Assembly procedure
7. Restoration of parts around floor
1) Restore the floor in the reverse order to step 1.
* When restoring, see 2), 3), and 4). (Following pages)
* See the precautions for restoration (page 29).
2) Restoration of work equipment lever link assembly
Restore the work equipment lever link according to the following procedure.
(1) Adjust the position of the link bracket assembly so that the clearance
between the lever and rod is even at the connecting portion of the rod
and lever and check that collar A rotates smoothly, and then fix the link
bracket assembly by tightening bolts 01024-81025.
01024-81025 x 6
(total on right
and left sides)
Examples of installation of link lever
○
Link bracket B is installed diagonally
×
Precautions
NO.0070
Restoration of parts around floor (1/4)
A
View from above lever link
Tools to be used
Name
Others
27
Connecting portion of rod and lever
Clearance is even
Clearance is uneven
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
Table of Contents
