Table of Contents
Advertisement
Using the tool as a hand screwdriver
Switch off the tool.
Move the reversing switch lever to the neutral position.
Turn the adjusting ring so that the arrow points to
the
marking.
Turn the tool.
NOTE: This use is convenient for checking the
screwdriving.
NOTE: Do not use the tool for work requiring exces-
sive force, such as tightening bolt or removing rusted
screws.
Using holster
Optional accessory
CAUTION:
When using the holster, remove a
driver bit/drill bit from the tool.
CAUTION:
Turn off the tool and wait until it
comes to a complete stop before placing it in the
holster.
Be sure to close the holster securely with the
holster button so that it holds the tool firmly.
1.
Thread a waist belt or similar through holster holder.
► 1 . Holster holder 2. Waist belt
2.
ster button.
You can keep two driver bits at the front of the holster.
MAINTENANCE
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE:
1
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
2
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Put the tool in the holster and lock it with the hol-
CAUTION:
Always be sure that the tool is
Never use gasoline, benzine, thinner,
Advertisement
Table of Contents
