LG LDC22370 Series Owner's Manual page 48

Bottom freezer refrigerator
Hide thumbs Also See for LDC22370 Series:
Table of Contents

Advertisement

47
TROUBLESHOOTING
Problem
Refrigerator or
Incorrect temperature control
Freezer section is
settings.
too cold.
Frost or ice
Condensation from food with a
crystals on frozen
high water content has frozen
food (inside of
inside of the food package.
sealed package).
Food has been left in the freezer
for a long period of time.
Icemaker is not
Demand exceeds ice storage
making enough
capacity.
ic
e.
(Ice maker installed
The house water supply is not
only)
connected, the valve is not
turned on fully, or the valve is
clogged.
The water
exhausted.
Low house water supply
pressure.
A reverse osmosis ltration
system is used.
The tubing connecting the
refrigerator to the house supply
valve is kinked.
Possible Causes
er has been
Solutions
If the temperature is too cold, adjust the control
one increment at a time and wait for the
temperature to stabilize. Refer to the Setting the
Controls section for more information.
This is normal for food items with a high water
content.
Do not store food items with high water content
in the freezer for a long period of time.
The icemaker will produce approximately 70~210
cubes in a 24 hour period.
Connect the refrigerator to a cold water supply
with adequate pressure and turn the water
shuto valve fully open.
If the problem persists, it may be necessary to
contact a plumber.
It is recommended that you replace the water
lter:
Approximately every six months.
When the water
er indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.
The water pressure must be between 20 and 120
psi (0,14 y 0,82 MPa) on models without a water
ter and between 40 and 120 psi (0,28 y 0,82 MPa)
on models with a wat
If the problem persists, it may be necessary to
contact a plumber.
Reverse osmosis
ration systems can reduce
the water pressure below the minimum amount
and result in icemaker issues.
(Refer to the "Water Pressure" section.)
The tubing can kink when the refrigerator is
moved during installation or cleaning resulting in
reduced water ow. Straighten or repair the water
supply line and arrange it to prevent future kinks.
er.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents