Ambient Temperature; Measuring The Clearances; Removing/Assembling The Refrigerator Door Handles - LG LDC22370 Series Owner's Manual

13 INSTALLATION

Ambient Temperature

Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.

Measuring the Clearances

Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 33 ¾ inches (86 cm) in front of
the refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.
33 ¾ " (86 cm)
Removing/Assembling the
Refrigerator Door Handles
Removing the Handles
1
Loosen the set screws
(2.5 mm) Allen wrench and remove the
handle.
2
Loosen the mounting fasteners
connect to the refrigerator door and handle
using a
remove the mounting fasteners.
2" (5.08 cm)
Assembling the Handles
1
Assemble the mounting fasteners
both ends of the handle using a
(6.35 mm) Allen wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a
NOTE
When it is necessary to move the
refrigerator through a narrow opening,
removing the doors is the recommended
procedure. If it is necessary to remove the
handles, follow the directions below. The
appearance of the handle may vary from
what is shown in the illustrations.
with a
1
/ in. (6.35 mm) Allen wrench, and
4
3
/ in. (2.5 mm) Allen wrench.
32
3
/ in.
32
that
at
1
/ in.
4