Honda SPORTRAX 250EX Owner's Manual page 105

０７／０４／１８ １２：５０：４８ ３２ＨＮ６６５０ ０１０６
1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug ( ).
3. Remove the oil filler cap ( ) and the drain plug.
4. After the oil has completely drained, reinstall the drain plug and
tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
5. Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is harmf ul to the environment.
6. Fill the gear case with the recommended oil.
80 cm (2.7 US oz , 2.8 Imp oz)
7. Remove the oil level check bolt ( ). Make sure the oil level reaches
the oil level check hole ( ).
8. Install the oil filler cap and oil level check bolt.
REAR
(4)
(3)
(1) oil drain plug
(2) oil filler cap
Gear Case Oil
1
2
158 ).
3
4
(2)
(1)
(3) oil level check bolt
(4) oil level check hole
Servicing Your Honda 97