Hooking Up The Unit; Revolving The Lcd Panel; Selecting The Operation Mode - LG DP382 User Manual

Hooking up the unit

Audio and Video Connection for AV IN or AV OUT
Connect the AV IN/OUT jack on the unit to the corresponding input or output
jacks on your TV or an external device using the supplied AV cable as shown
below.
TV or the external device
Manufactured under license from Dolby Laboratories. "Dolby" and the
double-D symbol are trademarks of Dolby Laboratories.
DP382-P_AISRSLK_ENG_MFL56732880.7 7 DP382-P_AISRSLK_ENG_MFL56732880.7 7

Revolving the LCD panel

You can revolve the LCD panel of the unit clockwise a maximum of 180
degrees for use. You can also operate the unit after revolving the LCD panel
180 degrees and folding it back down.
Right side of the unit
To revolve the LCD panel, place the unit on a stable and even surface such
as on a table. Push the LCD panel up and then lift it into a vertical position.
Plug into the
Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the
"AV IN/OUT"
LCD panel after revolving it.
jack.
To revolve the LCD panel to its original position, open the LCD panel to a verti-
cal position. Revolve the LCD panel counter clockwise slowly 180 degrees.
• When finished using the unit, return the LCD panel to its original position.
• Do not leave the LCD panel in the face-up position, or sudden shocks may
damage it.

Selecting the operation mode

• Select [DISC] to playback the inserted disc.
• Select [AV IN] to watch a video/audio signals from the external device using
this unit.
• Select [USB] to playback the file(s) in the connected USB Flash Drive.
You need to select a operation mode before
using this unit. Press MODE on the unit
and the operation mode selection menu
appears. Use b / B to select a mode then
press ENTER.
7
7/7/08 10:01:42 AM 7/7/08 10:01:42 AM