Brother SE700 Operation Manual page 14

Turning the Machine On/Off
CAUTION
• (For U.S.A. only)
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
electrical shock, this plug is intended to fit in a
polarized electrical outlet only one way.
If the plug does not fit fully in the electrical
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper electrical outlet. Do not modify the
plug in any way.
a Make sure that the machine is turned off (the main
power switch on the right side of the machine is set to
" "), and then plug the power cord into the power
supply jack underneath it.
b Insert the plug of the power cord into a household
electrical outlet.
2
1 Power supply jack
2 Main power switch
c Press the right side of the main power switch to turn
the machine on (set it to "I").
 The light, LCD and the "Start/Stop" button light up
when the machine is turned on. The needle and the
feed dogs will make a sound when they move; this is
not a malfunction.
12
1
d When the machine is turned on, the opening movie is
played. Touch anywhere on the screen.
Note
When you first turn on the machine:
• Select the display language for the LCD.
• The following message about a wireless LAN
connection appears. To set up a connection, touch
, and then refer to steps
"Using the wizard to set up the wireless network
connection" on page 17 to finish setting up a
wireless LAN connection.
e To turn off the machine, press the left side of the main
power switch (set it to "
c f
through in
").