Advertisement
2
Attach the Top Locker to the Hutch
□
Open the Top Locker door.
□
Attach the Top Locker (A) using 4 pcs M8*60 at bolts (AA) and 4 pcs washers (BB) with supplied Hex Key (DD) in
the 4 corners.
□
Once the Top Locker is ush along the front and sides of the Hutch, tighten the bolts.
Be careful not to overtighten.
□
If desired, the 2 Side Handles (B) can be attached to the ends of the Top Locker (A), or removed.
3
Plastic Plugs
□
Insert the Plastic Plugs (EE&FF) into the remaining open holes on the side and top walls of the Top Locker (A) per the
diagram below.
4
Kwikset Smartkey® Lock Operation
□
This product has been equipped with the Kwikset Smartkey® locks which allow you to easily program each lock
cylinder to a specific key code to match other Kwikset keyed products.
□
The lock cylinders have been factory keyed to the corresponding alphabetic lettering found on the Kwikset Smartkey®
label located on the back of the key chain, as well as af xed to the product itself.
□
Please see the Kwikset Smartkey® supplemental instructions for keying and re-keying the locks.
AA
BB
EE
Retain This Label
For Key Identification
D
TM
ONE KEY FOR ALL YOUR LOCKS
6
FF
Advertisement
