Table of Contents
Advertisement
Connection and Installation
- Video cable
Connect the video output jack of the camera to the monitor with BNC coaxial cable, as
shown below:
Please use an auxiliary video amplifier if the distance between the camera and monitor
exceeds the recommended maximum value.
It is recommended to use the pure copper coaxial cable instead of the
copper-clad iron cable, otherwise, it will result in problems of the
communication via the coaxial cable.
To guarantee the image quality, only use single-channel video output
connector when connecting the camera to other video equipment.
Distance
500m
300m
Recommended cable
specification
5C2V
3C2V
14
Advertisement
Table of Contents
