Disassembly Procedure; Removing Front Grille; Removing Wall Sleeve; Removing Electrical Junction Box - Sanyo STW-2 Series Technical & Service Manual

9. DISASSEMBLY PROCEDURE

9-1. Removing Front Grille

(1) Pull the bottom part of the front grille toward you.
(Fig. 1- )
(2) Lift up and unhook the grille to remove it.
(Fig. 1- )

9-2. Removing Wall Sleeve

(1) Remove 4 screws holding the wall sleeve. (Fig. 2)
(2) While supporting the bottom part of the unit, pull it
out of the wall sleeve. (Fig. 2)
9-3. Removing Electrical Junction
Box
(1) Remove knobs and the control panel from the
electrical junction box. (Fig. 3)
(2) Remove the screws holding the
electrical junction box.
(Fig. 4a and 4b)
Front grille
Unit
Control
panel
< 230 / 208 V Type >
Electrical
junction box
Fig. 4a
51
Wall sleeve
Knob
Electrical
junction box
< 265 V Type >
Cover plate
(Junction box)
Cover plate
(Junction box)
Wall sleeve
Fig. 1
Fig. 2
Fig. 3
Electrical
junction box
Terminal
base
Bottom
plate
Fig. 4b