General Information - Sony Airpeak S1 Startup Manual

Hide thumbs Also See for Airpeak S1:
Table of Contents

Advertisement

About the Wireless Transmission
Function
Cautions when using the remote controller
• When using the remote controller to fly an aircraft, turn off the
Wi-Fi® and Bluetooth® functions of the tablet or other mobile
device mounted on the remote controller.
• Take care not to cover the parts containing the built-in
antennas with your hand, cables, or other objects.
Built-in antenna position
• Point the handle bar (with built-in antenna) of the remote
controller toward the aircraft as shown in the illustrations
below.
Handle bar (with built-in antenna)
• If you do not operate the remote controller for 5 minutes while
it is turned on, an alarm will go off. After another minute, the
remote controller will automatically go into a standby state.
You can stop the alarm by performing an operation such as
moving the control stick, pressing a button, etc.
• If you notice any damage to the remote controller antenna,
contact Sony Customer Support. It may not be possible to
operate the aircraft.
• You need to link the remote controller and aircraft when you
replace the remote controller or are using a new one. Refer to
the Help Guide for details.
• When you turn off this product, be sure to turn off the aircraft
first and then the remote controller. If you turn off the remote
controller while the aircraft is still turned on, you will not be
able to operate the aircraft in case it moves accidentally. If this
happens, it may cause an accident or damage to the aircraft.
Handle bar (with
built-in antenna)

General Information

Aircraft/Gimbal
Using the product
• Comply with all applicable laws, regulations and ordinances,
including the Federal Aviation Administration's regulations in
14 C.F.R. Part 107, while using the aircraft and remote controller.
• For safety, do not change or modify aircraft components. When
installing external devices, be aware of the aircraft weight after
installation. Do not install external devices that exceed the
maximum payload. As external devices, use only genuine Sony
devices or devices recommended by Sony, and install in the
correct position as described in the instruction manual. Devices
that shift the aircraft center of gravity pose a risk of crashes.
Included AC power cord
Use only the included or Sony recommended AC adapters.
AC adapters
As AC adapters, use the included adapters.
Carrying components
• When carrying the aircraft, hold it securely by the frame arms.
If you do not hold it securely by the frame arms, you may drop
and damage the aircraft or hurt yourself.
• When carrying the remote controller, hold it by the handle bar.
Do not apply excessive force to the handle bar, control sticks, or
mobile device holder, which may damage these parts.
• Be careful not to drop the aircraft or remote controller when
carrying these components. Drops may cause damage or injury.
Installing external devices
The aircraft USB port can supply up to 500 mA of current. If
overcurrent conditions exceeding 500 mA occur while an external
device is installed, it may affect flight performance.
Maintenance and storage
• The recommended ambient temperature range for storage is
18 °C (64 °F) to 30 °C (86 °F).
• Thoroughly wipe off any water that has adhered to the aircraft
before storing it.
• Do not use the product if you notice any damage or
deterioration to the propellers or propeller attachment points
of the aircraft.
• Gently wipe off any dirt or dust on the aircraft, remote
controller, battery charger, or battery packs with a soft, dry
cloth.
• Do not use volatile substances such as alcohol or paint thinner
as they may damage the parts and cause deterioration.
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ars-s1

Table of Contents