[2] Attaching the damping plate to the aircraft
The damping plate (with the quick-release pre-installed), hex wrench, and hex screws are included in the gimbal set
(sold separately).
1
Confirm the orientation of the damping plate and place it on the aircraft.
With the quick-release arrow surface face-down and the arrow pointing toward the front of the aircraft, place the
damping plate on the attachment points of the aircraft.
Quick-release arrow
2
Attach the damping plate to the aircraft.
Attach it with the hex wrench (H2.5 mm) (0.1 in.) and hex screws included in the gimbal set (sold separately).
Attach at two positions
on each leg (eight total).
Notes
• Tighten the screws firmly using the hex wrench included in the gimbal set (sold separately). Otherwise, the screws may loosen and
detachment may occur during flight.
• When using tools other than the hex wrench included in the gimbal set (sold separately), be sure to tighten the screws with a torque
of 1.5 ±0.5 Nm.
20